Simple Cyanide Systems
Simple Cyanide Systems
The complete system comes with all components necessary for cyanide
The complete system includes distillation block with stand-alone
manifold, 12 sets of boiling tubes, 12 closures, tubing, 12 tubing adaptors, 12
two-port cap inserts, one tube rack, 100 disposable acid addition tubes and 100
disposable collection traps.
Modular configuration adds versatility.
The stand-alone 12-valve manifold can
be removed to allow your 12-place block to be used for other metals digestions.
The manifold can also be purchased separately to convert your 36-well HotBlock
(SC100) into a Simple Cyanide System. An 18-valve manifold is also available
and fits our SC154 HotBlock.
Proven HotBlock technology delivers performance and durability.
12-place Simple Cyanide Block is constructed from the same graphite and Kydex
used in our HotBlock Digestion Systems. Delta Scientific HotBlocks are used
in thousands of laboratories throughout the US and worldwide. This design
provides fast heat up and exceptionally uniform sample temperatures. Well
diameter and well depth are the same as our standard 50mL HotBlocks (SC154
and SC100), allowing the unit to function as a 12-position HotBlock for metals
when not in use for cyanide analysis. The block controller is easily adjustable
and continually displays the block temperature throughout the distillation
process. A timer function allows the analyst to set the distillation time. The block
can be set for automatic shut off at the end of the cycle.
Complete Simple Cyanide System:
12-place block, 12-valve manifold, 12 sets of boiling tubes, 12 closures, tubing, 12 tubing adaptors,
12 two-port inserts, tube rack, pack of disposable acid additions tubes and pack of collection traps.
Manifold Kits and Blocks Sold Separately:
12-valve Manifold Kit
12-valve manifold kit (for use with 12 and 36 well HotBlock) contains 1 stand alone manifold with 12
flow control valves, 1 barb connector, 12 borosilicate glass boiling tubes, one pack of (C6100) collection
traps, 1 pack of (C6110) acid addition tubes with funnel tips, 2 packs of (C6120) caps, 2 packs of
(C6120A) black neoprene washers, 2 packs of (C6130) two port cap inserts, 1 (C6142) tubing kit, 1 barb
18-valve Manifold Kit
18-valve manifold kit (for use with 54-well HotBlock) contains 1 stand alone manifold with 18 flow
control valves, 1 barb connector, 18 borosilicate glass boiling tubes, one pack of (C6100) collection
traps, 1 pack of (C6110) acid addition tubes with funnel tips, 3 packs of (C6120) caps, 3 packs of
(C6120A) black neoprene washers, 3 packs of (C6130) two port cap inserts, 1 (C6142) tubing kit, 1 barb
Components Sold Individually:
Boiling tube, borosilicate glass, 30mm x 200mm
12-place tube rack
25mL collection traps, pack of 100
Acid addition tube with separate funnel tip, pack of 100
38mm open top enclosure, polypropylene, pack of 6
Black neoprene washers, pack of 6
Two port cap insert, pack of 6
Tubing adaptors to fit 1/4" ID tubing and cyanide trap pack of 12
25' length of silicone rubber tubing, .375" OD x .25" ID
Simple Dist - Tubing Kit pack of 12
The unique top plate uses a
luer taper design to connect the
collection trap to the boiling flask.
Disposable acid addition tubes with
funnel-tops slide easily but firmly
into the boiling flask through the
The disposable polystyrene
collection trap is clearly marked
at 25mL and has a built-in vent
tube that makes pouring the final
solution easy and safe.
The SimpleDist Complete System
and all HotBlocks are also available
Previous Page - Next Page
-Laboratory Products Ltd.
Choose a different catalog.